The Only Lowdown on Sex Dolls Right Now- Before You Spend a Penny

0 Replies, 21 Views

[center][Image: nfaoxus406adxw2wnv657-1.jpg][/center]

[center]CLICK HERE FOR THE BEST SEX DOLL FEET ADVICE NOW[/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
You won't think about standing feet until you need them, and then you'll find the difference is enormous. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. If you grasp the difference before you order, you've stayed away from a frustrating purchase in one of the simplest ways there is.

Bolts or No Bolts
There's a straightforward basic difference. Standing feet have metal bolts embedded in the soles, which allow the doll to stand upright without support. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and attempting to stand her will damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.

Corners, Doorways and Anywhere Upright
Photography and display are where standing feet are vital. Photographed in full-length poses without apparent supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. That's the principal reason most photographers specify standing feet when ordering: it opens up a wide range of poses and settings that non-standing feet can't manage.

Standing Feet Are Also Essential for Showers
Standing feet are crucial for the shower as well. A shower with your doll only works if she can stand, as lying her down in one is both impractical and dangerous. Standing feet make her steady in a wet environment, and with the metal bolts the feet don't absorb water as non-standing feet would. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a real safety consideration.

Water Rusts the Metal Skeleton
Shower use deserves more detail, being the source of a lot of damaged dolls. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. Rust follows as the water attacks the metal skeleton inside the leg; it takes weeks or months to become apparent, but it's essentially unfixable once it starts. Because the water will find its way in anyway of your precautions, a doll with non-standing feet should never be in the shower, no matter how careful you are.

Space-Efficient Storage
Some setups make standing feet easier to store as well. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. Customers who don't have room for a hanging setup will find this a space-efficient option, and it suits purchasers who want to display the doll rather than keep her hidden. Standing feet permit storage that's visible and accessible, something some customers prefer.

Is the Premium Worth Paying?
The downside of standing feet is that they're a little more costly and a little heavier. A few percent extra on the price is usual compared with a doll with non-standing feet, thanks to a small quantity of weight from the metal bolts and a more involved manufacturing process. Though the difference is small and it's generally worth the extra cost, knowing about it matters if you're purchasing on a really tight budget.

Bolts in Photos
Bare feet can make the bolts visible, which is the other downside. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some customers find this distracting. Cover the feet with closed shoes or pick footwear that hides the bolts and this trivial aesthetic issue is solved, so it's not a reason to steer clear of standing feet completely.

Know What You Want
Non-standing feet are cheaper and lighter, and they're fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her. Non-standing feet do the job for a bed-or-sofa doll, and what you save can go towards articulated hands, a better wig or similar upgrades. Entirely valid is this choice for purchasers who know what they want.

No Hard Core Inside
Non-standing feet are a little softer and more adaptable too, and some purchasers find that more comfortable to touch. Specifically looking for maximum softness? Then this subtle difference, though not normally enough to justify the choice on its own, is worth knowing about. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.

The Big Risk With Non-Standing Feet
The big risk? Customers forget what kind of feet they have and try to stand the doll in any case. It's a widespread error with genuine outcomes, since the foam inside the ankle can't support the doll's weight and will tear or collapse. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. When you buy non-standing feet, remember what they are and don't be tempted to test their limits.

New Hardware Rarely Works as Well
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. In short, no, not readily. The bolts are embedded in the soles during manufacturing, and adding them subsequently requires cutting into the feet and installing new hardware, which is pricey and frequently doesn't work as well as the original. Attempting to add standing feet later is worse than purchasing a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, acquire them first.

Photography, Display or Shower: You Need Standing Feet
For customers who are picking between standing and non-standing feet, the practical advice is simple. Photographing the doll, displaying her standing, or employing her in the shower? Then you need standing feet. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly sufficient. Not sure? Select standing feet: nothing is off the table with them, and the small extra cost is worth paying.

Upright Storage for Male Dolls
We should mention a gender consideration as well. Because male dolls are heavier and more difficult to store in any other way, they usually get more from standing feet than female dolls do. There's no choice but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and requires more space. Not having a lot of room? Standing feet give male dolls the ability to store upright, and that's a real advantage.

Harder Soles Because of the Bolts
The aesthetic difference between standing and non-standing feet is worth a final note. Apparent when the doll is barefoot can be the minor hardness at the bottom of standing feet, which the bolts cause. Some purchasers don't find this aesthetically satisfying, especially on dolls with fragile features, since the hard soles look somewhat industrial. Non-standing feet are more natural-looking and softer, something some purchasers prefer. Photographing the doll barefoot is the only time this trade-off matters, and it's worth factoring into your decision if barefoot photos are a priority.

Non-Standing Feet Are Lower-Maintenance
Maintenance is another angle that's worth considering. Why check periodically? A loose bolt can damage the foot or the ankle, and if one falls out totally the doll can collapse. A mild twist of the bolts every few months checks them; if they feel loose, tighten them with the appropriate tool. No hardware means nothing to come loose, so non-standing feet don't have this issue and are marginally lower-maintenance in the long run.

Stability Depends on the Surface
Different surfaces change how the doll stands, thanks to the bolts. Grip is solid on carpet, and the doll is stable. The doll may need additional support to stay upright when the bolts slip on hard flooring, particularly a smooth floor. Sliding on a hard surface? A small mat or grippy pad under the feet avoids it. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

Non-Standing Feet Are Slightly Shorter
There's a final consideration that's often overlooked, which is how standing feet influence the doll's overall proportions. In barefoot photos, the way the doll looks can be a little changed by the small amount of length the bolts add to the foot. This subtle effect, usually invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about exact proportions. No bolts means no such effect with non-standing feet, whose feet are a little shorter and more natural-looking.

The Bottom Line: Standing Feet Are Worth It
At the end of the day, standing feet are worth the additional cost for most purchasers, as they open up choices for posing, display, storage and the shower that non-standing feet don't. Customers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this rosslink. Also check out additional info bearing in mind about his and click this link now for more.
[center][Image: lwje3h40r9td4hani42wf.jpg][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]



Users browsing this thread: 1 Guest(s)