[center]
[/center]
[center]CLICK FOR THE BEST SEX DOLL HAND ADVICE NOW[/center]
Which Sex Doll Hands Are Best? Articulated Vs Wired Hands Compared
Ask a new customer about the hands and they'll have nothing to say, but within weeks they'll have plenty, none of it decent. Same script each time: the doll gets ordered and delivered, looks superb, and then attempting to pose the hands exposes fingers that are stiff, floppy or breakable. The most widespread complaint from first-time owners is also totally avoidable, provided you understand the two principal types of hands before you order.
Wire Inside Every Finger
Cheaper and more prevalent, standard wire hands are the default choice. A thin metal wire through every finger, set in gentle TPE or silicone, lets them bend readily for posing, as designed. Natural-looking pliable material surrounds the wire, which is thin enough to be adaptable, so you can position the fingers into a variety of shapes. On a light doll, they work fine, and if you're not employing the hands much, they're perfectly adequate. When the doll is weighty, though, they're a problem.
Why Wire Hands Break
The trouble with standard wire hands is a wire that has only a limited lifespan. After a certain number of bends it snaps, the finger goes floppy, and fixing it isn't straightforward. Enough to break the thin wire inside the finger is the continuous pressure of holding a pose, the weight of the doll's arm, or just handling the doll typically over time. While some purchasers report fingers breaking within a few months, others get a year or two out of them before the wires fail. Failure is coming either way, and it's a matter of when rather than if.
Small Pivots, Multiple Bend Points
The upgrade is articulated hands. They use individual stainless steel finger joints instead of a single wire, and each joint has a small pivot that allows the finger to bend at multiple points. It's much stronger than a wire, and the joints can hold a pose without straining the surrounding material. Practically every customer should consider articulated hands worth the upgrade, despite the additional fifty to a hundred pounds, depending on the maker. Both durability and poseability improve hugely.
The Most Expressive Part of a Pose
The first advantage of articulated hands is that they hold poses. Each joint of an articulated hand is designed to hold, so it stays in the position you put it, unlike a wire hand, which tends to sag as the wire can't maintain tension. The doll can therefore grip objects, rest her hand on her hip, or hold a pose for photography without the fingers drooping. One of the most expressive parts of any pose is the hands, which makes this a huge advantage for anyone who photographs their doll.
Pivots Designed to Last
Second comes durability. Wire fatigue isn't an issue with articulated hands, which have stainless steel joints and long-lasting pivots by design. Material around the joints may wear with time, but the joints are far more tough than wire, so a snapping finger is a dramatically lower risk. Substantial dolls make this matter more: a 45kg doll puts wire hands under constant strain, so they break faster than on a lighter doll.
Defined Fingers, Not Squashed Ones
In poses, articulated hands look more realistic; that's the third advantage. Rubbery-looking, a little, is the typical state of a bent wire hand, since the wire doesn't support the material properly. Holding the finger shape more crisply, articulated hands give more defined fingers that look less squashed into position. This is particularly apparent in photographs, where the difference between a wire hand and an articulated hand is plain to anyone who knows what to look for.
Posing With Objects
The fourth advantage is a more complete-feeling doll. A doll with articulated hands can gesture, point, hold and grip in ways a wire-handed doll simply can't, the hands being one of the most expressive parts of the body. Dynamic compositions, props and held objects become possible, which they wouldn't be otherwise, and posing gets an entirely new dimension. This is a significant benefit for photographers and roleplay enthusiasts.
Pushing the Total Out of Your Range
Cost comes first among the downsides of articulated hands. They're more expensive, and if you're acquiring on a tight budget, the extra fifty to a hundred pounds might be enough to push the total out of your range. Cheaper at first, possibly, but the cost of replacing a faulty wire hand or the frustration of floppy fingers is generally worse than the upfront cost of articulated hands, so long term the upgrade is almost consistently worth it.
Joints Designed to Resist Movement
Articulated hands can be somewhat stiffer than wire hands, and that's the second downside. The joints resist movement more than wire, since holding a pose is what they're designed for. You need to put a bit more effort into positioning the fingers, but it's a great thing for posing that the hand stays where you put it. If you're used to wire hands that bend readily, you might find this frustrating, as some buyers do. Within a few days most buyers adjust, which makes it a trivial trade-off.
Reinserting a Popped Joint
Third, articulated hands can be marginally more delicate than wire hands, though in a different way. Although the joints are strong, the connections between them and the material can at times come loose, and wrenching a finger out of position can pop a joint out, which then needs reinserting. It happens, although less often than wire breakage, and you should know about it before buying. If a finger doesn't want to go into a position, don't force it; and when you move the hand, support it properly.
When the Size Difference Shows
Frequently marginally larger than wire hands, articulated hands bring the fourth drawback. Chunkier-looking fingers can result from the space the extra joints take up. On smaller dolls the difference can be visible, even though it's ordinarily small and most purchasers don't notice, and a petite doll with fragile proportions might look marginally off with articulated hands. Scaled proportionally, or not? Ask the vendor about the articulated hands on a particular doll, as some manufacturers do this better than others.
Wire or Articulated? Just Buy Articulated
Direct useful advice for anyone deciding between wire and articulated hands: acquire articulated. Though more expensive, they're the single best functionality upgrade available and will save you the frustration of broken fingers and drooping poses. The one case for wire hands is an extremely tight budget with no hand posing planned, and even there you should weigh the savings against the inevitable replacement cost.
Pushing a New Wire Through
One more question: what happens if you already have a doll with wire hands and the fingers break? There are two repair alternatives for wire hands that work in some cases: a new wire pushed through the finger, or a small amount of TPE repair compound to reinforce the joint. Repaired fingers are hardly ever as decent as the original, and the likelihood is another break within a few months. A replacement pair of articulated hands usually works out a better investment than repairing wire ones, as long as you're committed to keeping the doll long-term.
Wipe Down After Every Use
One maintenance consideration is worth knowing about if you're purchasing a doll with articulated hands. The metal can corrode and the joints can seize up if moisture gets to them, so they need to be kept clean and dry. Water or cleaning goods are the primary risk, so wipe the hands down and dry them fully after every use, notably then. Every few months, put a small quantity of silicone-based lubricant on the joints. They'll keep moving smoothly, and the metal won't grind against the surrounding material.
Constant Material vs Concealed Joints
A word or two on the visual difference between the two hand types is in order. Marginally smoother and softer is how wire hands tend to look, thanks to the ongoing material around the wire. Some purchasers find the noticeable joint lines on articulated hands less aesthetically gratifying. If you care about visual realism, know that the joints are generally concealed under a thin layer of material but can be apparent when the fingers are bent. Still, put them into a complex pose and they look more like real hands, which is why the trade-off is often worth making.
An Upgrade That Pays for Itself Many Times Over
Articulated hands are almost consistently the better choice, and that's the bottom line. For a small extra cost, particularly compared with the frustration of faulty fingers, they're more hard-wearing, more poseable and more realistic in photos. For a new doll, specify articulated hands in the order. If the doll is used, check for articulated hands and let that impact the price. Whether you order new or buy used, it pays for itself countless times over. More info at this rosslink. Also check out recommended site for more.
[center]
[/center]
[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
[/center] [center]CLICK FOR THE BEST SEX DOLL HAND ADVICE NOW[/center]
Which Sex Doll Hands Are Best? Articulated Vs Wired Hands Compared
Ask a new customer about the hands and they'll have nothing to say, but within weeks they'll have plenty, none of it decent. Same script each time: the doll gets ordered and delivered, looks superb, and then attempting to pose the hands exposes fingers that are stiff, floppy or breakable. The most widespread complaint from first-time owners is also totally avoidable, provided you understand the two principal types of hands before you order.
Wire Inside Every Finger
Cheaper and more prevalent, standard wire hands are the default choice. A thin metal wire through every finger, set in gentle TPE or silicone, lets them bend readily for posing, as designed. Natural-looking pliable material surrounds the wire, which is thin enough to be adaptable, so you can position the fingers into a variety of shapes. On a light doll, they work fine, and if you're not employing the hands much, they're perfectly adequate. When the doll is weighty, though, they're a problem.
Why Wire Hands Break
The trouble with standard wire hands is a wire that has only a limited lifespan. After a certain number of bends it snaps, the finger goes floppy, and fixing it isn't straightforward. Enough to break the thin wire inside the finger is the continuous pressure of holding a pose, the weight of the doll's arm, or just handling the doll typically over time. While some purchasers report fingers breaking within a few months, others get a year or two out of them before the wires fail. Failure is coming either way, and it's a matter of when rather than if.
Small Pivots, Multiple Bend Points
The upgrade is articulated hands. They use individual stainless steel finger joints instead of a single wire, and each joint has a small pivot that allows the finger to bend at multiple points. It's much stronger than a wire, and the joints can hold a pose without straining the surrounding material. Practically every customer should consider articulated hands worth the upgrade, despite the additional fifty to a hundred pounds, depending on the maker. Both durability and poseability improve hugely.
The Most Expressive Part of a Pose
The first advantage of articulated hands is that they hold poses. Each joint of an articulated hand is designed to hold, so it stays in the position you put it, unlike a wire hand, which tends to sag as the wire can't maintain tension. The doll can therefore grip objects, rest her hand on her hip, or hold a pose for photography without the fingers drooping. One of the most expressive parts of any pose is the hands, which makes this a huge advantage for anyone who photographs their doll.
Pivots Designed to Last
Second comes durability. Wire fatigue isn't an issue with articulated hands, which have stainless steel joints and long-lasting pivots by design. Material around the joints may wear with time, but the joints are far more tough than wire, so a snapping finger is a dramatically lower risk. Substantial dolls make this matter more: a 45kg doll puts wire hands under constant strain, so they break faster than on a lighter doll.
Defined Fingers, Not Squashed Ones
In poses, articulated hands look more realistic; that's the third advantage. Rubbery-looking, a little, is the typical state of a bent wire hand, since the wire doesn't support the material properly. Holding the finger shape more crisply, articulated hands give more defined fingers that look less squashed into position. This is particularly apparent in photographs, where the difference between a wire hand and an articulated hand is plain to anyone who knows what to look for.
Posing With Objects
The fourth advantage is a more complete-feeling doll. A doll with articulated hands can gesture, point, hold and grip in ways a wire-handed doll simply can't, the hands being one of the most expressive parts of the body. Dynamic compositions, props and held objects become possible, which they wouldn't be otherwise, and posing gets an entirely new dimension. This is a significant benefit for photographers and roleplay enthusiasts.
Pushing the Total Out of Your Range
Cost comes first among the downsides of articulated hands. They're more expensive, and if you're acquiring on a tight budget, the extra fifty to a hundred pounds might be enough to push the total out of your range. Cheaper at first, possibly, but the cost of replacing a faulty wire hand or the frustration of floppy fingers is generally worse than the upfront cost of articulated hands, so long term the upgrade is almost consistently worth it.
Joints Designed to Resist Movement
Articulated hands can be somewhat stiffer than wire hands, and that's the second downside. The joints resist movement more than wire, since holding a pose is what they're designed for. You need to put a bit more effort into positioning the fingers, but it's a great thing for posing that the hand stays where you put it. If you're used to wire hands that bend readily, you might find this frustrating, as some buyers do. Within a few days most buyers adjust, which makes it a trivial trade-off.
Reinserting a Popped Joint
Third, articulated hands can be marginally more delicate than wire hands, though in a different way. Although the joints are strong, the connections between them and the material can at times come loose, and wrenching a finger out of position can pop a joint out, which then needs reinserting. It happens, although less often than wire breakage, and you should know about it before buying. If a finger doesn't want to go into a position, don't force it; and when you move the hand, support it properly.
When the Size Difference Shows
Frequently marginally larger than wire hands, articulated hands bring the fourth drawback. Chunkier-looking fingers can result from the space the extra joints take up. On smaller dolls the difference can be visible, even though it's ordinarily small and most purchasers don't notice, and a petite doll with fragile proportions might look marginally off with articulated hands. Scaled proportionally, or not? Ask the vendor about the articulated hands on a particular doll, as some manufacturers do this better than others.
Wire or Articulated? Just Buy Articulated
Direct useful advice for anyone deciding between wire and articulated hands: acquire articulated. Though more expensive, they're the single best functionality upgrade available and will save you the frustration of broken fingers and drooping poses. The one case for wire hands is an extremely tight budget with no hand posing planned, and even there you should weigh the savings against the inevitable replacement cost.
Pushing a New Wire Through
One more question: what happens if you already have a doll with wire hands and the fingers break? There are two repair alternatives for wire hands that work in some cases: a new wire pushed through the finger, or a small amount of TPE repair compound to reinforce the joint. Repaired fingers are hardly ever as decent as the original, and the likelihood is another break within a few months. A replacement pair of articulated hands usually works out a better investment than repairing wire ones, as long as you're committed to keeping the doll long-term.
Wipe Down After Every Use
One maintenance consideration is worth knowing about if you're purchasing a doll with articulated hands. The metal can corrode and the joints can seize up if moisture gets to them, so they need to be kept clean and dry. Water or cleaning goods are the primary risk, so wipe the hands down and dry them fully after every use, notably then. Every few months, put a small quantity of silicone-based lubricant on the joints. They'll keep moving smoothly, and the metal won't grind against the surrounding material.
Constant Material vs Concealed Joints
A word or two on the visual difference between the two hand types is in order. Marginally smoother and softer is how wire hands tend to look, thanks to the ongoing material around the wire. Some purchasers find the noticeable joint lines on articulated hands less aesthetically gratifying. If you care about visual realism, know that the joints are generally concealed under a thin layer of material but can be apparent when the fingers are bent. Still, put them into a complex pose and they look more like real hands, which is why the trade-off is often worth making.
An Upgrade That Pays for Itself Many Times Over
Articulated hands are almost consistently the better choice, and that's the bottom line. For a small extra cost, particularly compared with the frustration of faulty fingers, they're more hard-wearing, more poseable and more realistic in photos. For a new doll, specify articulated hands in the order. If the doll is used, check for articulated hands and let that impact the price. Whether you order new or buy used, it pays for itself countless times over. More info at this rosslink. Also check out recommended site for more.
[center]
[/center] [center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
